Skip to content 
Top-Quality Moisture Mitigation Systems in Menomonie, WI
Armor of God Epoxy evaluates concrete moisture before covering the slab, using testing and suitable mitigation systems when elevated vapor could threaten flooring in basements, garages, commercial spaces, and older buildings across Menomonie.
- 11 Years of Military Discipline
- Diamond Grinding on Every Floor
- Free Estimates & Personal Service
Why Homeowners & Businesses Trust Armor of God
Real customers across Dunn County chose Armor of God Epoxy for one reason: Tony Falkner treats every driveway, garage, and commercial floor with the same discipline he learned in 11 years of Army service. No shortcuts, no vague promises, just proper diamond grinding, honest pricing, and a finished floor every homeowner is proud to show off.
Boots N Spurs
Flooring, counters, shower, and even a dog wash completed by armor of God epoxy and our house is complete! Quality work, customization to exactly what you want, professional and affordable! Thank you!
Kaylee Markle
Purchased a wonderful toolbox countertop from Armor of God Epoxy. Amazing customer service, shipping, and communication! Thanks again!
Randy Zingshiem
Honest and friendly company that does great work. We will definitely be working with them again.
Concrete can look dry and still be moving moisture toward the surface. That is exactly why Armor of God Epoxy provides Moisture Mitigation Systems in Menomonie, WI before installing coatings over slabs that show elevated or uncertain moisture conditions. Tony Falkner does not rely on appearance alone.
The useful questions are what the concrete is doing below the surface, how much moisture is present, and whether the planned flooring can tolerate it. Sometimes the answer is mitigation. Sometimes the moisture problem needs a different repair first.
What a Moisture Barrier Fixes, and What It Cannot
A moisture mitigation system is built to reduce vapor moving up through a concrete slab into whatever flooring goes on top of it. These systems are usually resin-based, two-component epoxy moisture barriers built for cementitious substrates, being a common example.
The barrier becomes part of the actual flooring build, going down between the prepared concrete and everything installed above it, following the exact product spec. Done right, that opens a viable installation path where ordinary flooring would otherwise face too much vapor exposure.
Product limits still apply, and moisture mitigation should never get oversold as one coat that blocks every possible water problem. The distinction between vapor and active water is the whole reason this gets treated as two separate problems. Moisture vapor moving through concrete is a completely different problem than water entering through a basement wall, drain, crack, or failed exterior drainage system.
Hydrostatic pressure adds another layer entirely, tied to an external moisture source pushing against an on-grade or below-grade slab. Active water intrusion needs its own fix, full stop; if a basement is actually flooding or taking on visible water, drainage or building-envelope repair comes first.
We Read Old Basement Concrete Before It Gets Coated
Older homes across western Wisconsin have slabs poured long before anyone thought about flooring plans, and plenty of owners have no idea what’s actually happening underneath the concrete.
No vapor record, no history, just a slab. Previous flooring leaves clues like old tile adhesive, peeling paint, efflorescence, darkened concrete, or coatings that keep failing. None of that proves a specific moisture level on its own, but it’s enough reason to look closer before committing to a finished floor.
Armor of God Epoxy evaluates the slab first, turning that uncertainty into real information instead of an expensive guess. Peeling does not automatically mean moisture caused it; poor prep, contamination, weak concrete, and incompatible materials can all produce the same symptoms.
Still, moisture belongs on the list whenever a coating blisters or repeatedly lets go of the slab, since moisture-related blistering is one of the exact problems specialized mitigation systems are built to fix.
Tony reads the pattern rather than jumping to one cause: where the failure shows up, what was installed before, how it was prepped, and whether the slab actually tests high for moisture. Together, that separates an actual moisture problem from a plain coating problem.
Why Moisture Systems & New Concrete Need Real Testing
A moisture barrier always sits on top of a slab, whether that’s epoxy, a flake system, solid color, or another resin built entirely. How well those layers actually work together matters; moisture-control membranes are specifically designed to protect the flooring installed above them from excess subfloor moisture and pH.
Armor of God Epoxy looks at the whole system before deciding how to proceed: barrier, primer, body coat, decorative finish, and topcoat, all working together instead of picking the mitigation product first and figuring out the finished floor as an afterthought.
New concrete does not mean dry concrete, either. Fresh slabs hold water from the mixing and curing process, and some retain enough internal moisture to delay flooring well past when an owner wants the project done. Certain moisture-control products are built specifically to allow installation over concrete with elevated residual moisture, as long as the substrate meets what the system requires.
Why Armor of God Epoxy for Moisture Mitigation
Tony Wants Evidence Before Adding a Barrier
Moisture mitigation adds material and labor. Armor of God Epoxy wants a reason for including it instead of treating every slab as a hidden moisture emergency.
Mitigation Does Not Get Sold as Waterproofing
A flooring moisture barrier and an active drainage solution solve different problems. Tony keeps those boundaries clear so customers do not expect a coating to repair groundwater, leaking walls, or flooding.
The Finished Floor Stays Part of the Decision
Armor of God Epoxy does not isolate the moisture product from everything above it. The mitigation layer gets considered alongside the coating chemistry and intended floor system.
We Stay With the People Doing the Work
For related concrete coating and restoration options, review Armor of God Epoxy services.
What Wisconsin Homeowners Should Know About Epoxy
- • FLOOR PREP
- • MAINTENANCE
- • COATINGS
- • MAINTENANCE
- • COATINGS
- • FLOOR PREP
Moisture Mitigation Questions
1. Can a basement look dry and still fail a moisture test?
Yes. Surface appearance does not show everything happening inside the concrete. Homeowners regularly encounter slabs that feel dry while moisture testing tells a different story. That is why testing can be useful before installing moisture-sensitive flooring.
2. Will moisture mitigation stop my basement from flooding?
No. A moisture reduction system is designed to control suitable vapor transmission through concrete. Flooding, hydrostatic pressure, leaking foundation walls, failed drains, and active water entry may require separate correction before flooring work proceeds.
3. Does every basement coating need a moisture barrier?
No. The need depends on slab conditions, testing, the planned flooring, building history, and the moisture limits of the selected system. Automatically adding one without evaluating the floor can be unnecessary.
4. Can moisture cause an epoxy floor to bubble or peel?
It can contribute to blistering or adhesion failure when vapor conditions exceed what the flooring system can handle. However, preparation, contamination, weak concrete, and installation errors can produce similar symptoms. The cause should be investigated rather than guessed.
5. Can moisture mitigation be used over new concrete?
Certain professional products are designed for high-moisture concrete and can help shorten flooring delays. The slab still has to meet the technical requirements of the selected mitigation system.
Built in Menomonie. Trusted Across Western Wisconsin.
Menomonie is home base, but the same crew, the same moisture testing, and the same standard travel with the trailer to every county on this list.
