Superior Industrial Flooring Epoxy in Menomonie, WI

Armor of God Epoxy prepares and coats industrial concrete across Menomonie for demanding working spaces, including facilities, aircraft hangars, public buildings, and pole sheds where floor condition and daily use determine the right system.

schedule now

Customer Reviews

Why Homeowners & Businesses Trust Armor of God

Real customers across Dunn County chose Armor of God Epoxy for one reason: Tony Falkner treats every driveway, garage, and commercial floor with the same discipline he learned in 11 years of Army service. No shortcuts, no vague promises, just proper diamond grinding, honest pricing, and a finished floor every homeowner is proud to show off.

Boots N Spurs

Flooring, counters, shower, and even a dog wash completed by armor of God epoxy and our house is complete! Quality work, customization to exactly what you want, professional and affordable! Thank you!

Kaylee Markle

Purchased a wonderful toolbox countertop from Armor of God Epoxy. Amazing customer service, shipping, and communication! Thanks again!

Randy Zingshiem

Honest and friendly company that does great work. We will definitely be working with them again.

Not every square foot of an industrial floor works the same way.

A section under a loading dock takes a completely different use than a walkway three rooms over, yet plenty of coating jobs still treat the whole slab like one uniform surface.

Armor of God Epoxy starts differently on industrial flooring epoxy jobs in Menomonie. Before recommending anything, the team looks at what the building actually does: equipment weight, storage load, traffic patterns, existing wear, cleaning routines, years of prior use.

Some zones need heavier-duty prep than others, and the coating system should reflect that instead of matching a sample chip pulled off a rack.

Industrial Flooring Starts With the Building

A facility manager may care about completely different things from the owner of a pole shed.

One property might need a large worn slab restored before coating. Another may have moisture concerns. A public building could place steady foot traffic on certain corridors, while a hangar may need a clean finished surface across a wide open floor. Those differences affect preparation and system choice.

Armor of God Epoxy assesses the concrete before deciding what belongs on top of it. Previous coatings, repairs, cracks, contamination, surface wear, moisture, and changing conditions across the slab can all influence the project. Industrial flooring works best when those facts shape the plan from the beginning.

Facility Floor Coatings

Facilities rarely wear their floors evenly. Main travel paths usually see more activity than perimeter areas. Production or work zones can place different demands on the concrete than storage sections. Entrances may bring in moisture and grit that never reach protected parts of the building. That means one large room can contain several flooring conditions. Armor of God Epoxy evaluates how the facility is divided and where the concrete needs the most attention. From there, preparation can address the existing slab rather than treating square footage as the only important number. System selection can also account for the environment. Epoxy systems can suit many general industrial areas, while urethane cement becomes relevant in harsher settings involving greater thermal, moisture, chemical, or abrasion demands. The practical question is not simply how large the floor is. It is what happens across that floor every working day.

Aircraft Hangar Floor Coatings

Aircraft hangars create a very different flooring problem from smaller commercial interiors. Large uninterrupted slabs make the condition of the concrete easy to notice. Previous repairs, surface wear, stains, joints, and old coatings can become much more visible once the space is cleared. Preparation therefore carries significant weight. Armor of God Epoxy examines the existing floor before deciding how aggressively it needs to be ground, repaired, restored, or otherwise prepared. A hangar coating can also improve the visual order of the space. A finished surface gives the large floor a more intentional appearance and can help work areas look better defined. However, appearance does not decide the entire system. Traffic, maintenance, working conditions, existing slab quality, and any moisture concerns still need to influence the final coating build. See Our Work

Public Building Floor Coatings

A public building places another kind of pressure on concrete. The floor may serve staff, visitors, community members, maintenance crews, and daily foot traffic throughout the same week. Entrances and main corridors can receive far more use than quieter sections of the building. Maintenance also matters because these spaces may need regular cleaning without becoming difficult to manage. Armor of God Epoxy can plan public building coatings around the function of each area instead of making every section visually or technically identical. Surface texture deserves consideration where tracked-in moisture may reach the floor. Resinous flooring systems can also be built with different texture levels when slip resistance is a priority. For Menomonie properties, winter conditions can make entry zones worth discussing separately from protected interior areas. That type of planning gives the coating a reason for being there instead of turning the project into a simple color change.

Pole Shed Floor Coatings

Pole sheds can be some of the hardest buildings to categorize because owners use them in so many different ways. One may function mainly as storage. Another becomes a workshop. Some properties combine equipment, workbenches, seasonal storage, and open floor space under the same roof. The concrete can reflect that history. There may be heavily worn sections beside areas that still look relatively untouched. Previous stains or surface damage may also be concentrated where work happens most. Armor of God Epoxy evaluates that use pattern before recommending an industrial floor coating. A pole shed does not need to imitate a showroom to benefit from finished concrete. The coating can stay practical and straightforward while giving the slab a more complete surface. The right finish depends on how refined the owner wants the building to feel and what happens inside it.

Large Floors Need More Than a Coating Day

Industrial floor projects involve another factor that becomes increasingly important as square footage grows. Access. Grinding, repair, surface preparation, coating application, and curing all require usable floor space. Equipment, inventory, furniture, workstations, or stored materials may need to move before sections become available. That makes project planning part of the installation itself.

Armor of God Epoxy can assess the floor before work begins so owners understand which sections need additional attention. A damaged slab, old coating, or moisture issue can change the amount of preparation required. Moisture deserves particular attention because vapor movement through concrete can contribute to flooring problems if the selected system does not account for it.

Industrial coating manufacturers recommend testing concrete where moisture may affect adhesion or flooring performance. Discovering those conditions early creates a better project plan than uncovering them halfway through installation.

When the Existing Slab Needs Work First

Industrial concrete can accumulate years of repairs, wear, coatings, stains, and damaged sections before anyone considers a new flooring system. Some of those slabs need more than normal surface preparation. Armor of God Epoxy provides floor resurfacing and restoration when damaged concrete requires corrective work before coating.

Moisture mitigation is also available when testing identifies conditions that need to be addressed within the flooring build. Existing coatings require evaluation as well. A new system should not depend on poorly bonded material underneath it.

Mechanical preparation helps expose the actual condition of the surface and creates a better foundation for the work that follows. This is especially important across larger industrial slabs because one weak section can represent a much larger repair later.

Why Industrial Properties Choose Armor of God Epoxy

The Floor Gets Divided by Use Before Square Footage

Large industrial spaces rarely behave like one single slab. Armor of God Epoxy looks at traffic paths, work areas, entrances, storage zones, wet sections, and other differences before reducing the project to a square-foot number. That creates a clearer picture of what the building actually asks from its floor.

Existing Concrete Becomes Part of the Scope

An industrial project may arrive with decades of history already embedded in the slab. Old repairs, old coatings, and damaged areas can change the preparation process. Armor of God Epoxy accounts for those conditions instead of pricing the visible surface as though the concrete underneath were new.

The System Has to Earn Its Place

Tony Falkner does not need every industrial project to use the same coating chemistry. General-use areas and demanding process environments can require different solutions. Epoxy, polyaspartic, urethane cement, restoration work, and moisture remain separate tools rather than one repeated package.

We Stay With the People Doing the Work

Industrial work can involve access windows, cleared sections, operational schedules, and floor conditions that change the installation plan. Field work stays with Tony, scheduling stays with Liz, and job details never have to travel through layers of people who aren’t actually doing the work.

Read more about the people behind Armor of God Epoxy on the About page.

our blog

What Wisconsin Homeowners Should Know About Epoxy

Aug 2026
• FLOOR PREP

What Wisconsin Winter Does to Garage Concrete

Freeze-thaw cycles, road salt, and moisture can crack and spall your garage floor. Learn how to protect and repair concrete before spring.

Aug 2026
• MAINTENANCE

Keeping a Coated Floor Looking Sharp

A properly installed floor lasts for years, knowing what to use and avoid keeps the finish clean.

Aug 2026
• COATINGS

Epoxy vs. Polyaspartic

The right system depends on your concrete condition, cure time, and usage.

Aug 2026
• MAINTENANCE

What Wisconsin Winter Does to Garage Concrete

A properly installed floor lasts for years, knowing what to use and avoid keeps the finish clean.

Aug 2026
• COATINGS

What Wisconsin Winter Does to Garage Concrete

The right system depends on your concrete condition, cure time, and usage.

Aug 2026
• FLOOR PREP

What Wisconsin Winter Does to Garage Concrete

Freeze-thaw cycles, road salt, and moisture can crack and spall your garage floor. Learn how to protect and repair concrete before spring.

Industrial Flooring Questions

1. Can different areas of one facility use different floor systems?

Yes, and in some buildings that approach makes more sense. A dry storage section may not face the same exposure as a wash area, entrance, production zone, or heavily worked section of the facility. The coating system can be chosen according to how each part of the building functions. However, transitions between areas also need to be planned so the finished project works as one connected floor.

2. Does all industrial concrete need diamond grinding before coating?

Professional resinous flooring requires proper surface preparation, but the exact method depends on the slab and selected system. Armor of God Epoxy evaluates the existing surface before determining the preparation scope. Previous coatings, contamination, damage, repairs, and concrete conditions can all change the work required. Diamond grinding gives the installer mechanical control over the concrete surface and helps expose conditions hidden beneath old finishes.

3. When should urethane cement be considered instead of standard epoxy?

Urethane cement deserves consideration in demanding environments where repeated moisture, abrasion, aggressive cleaning, chemical exposure, or rapid temperature changes place added stress on the floor. It does not automatically make sense for every industrial property. Armor of God Epoxy can compare the working conditions with the available systems before deciding which chemistry fits the space.

4. Can an industrial floor be restored instead of completely replaced?

Some damaged concrete can be repaired or resurfaced before receiving a coating system. The extent and cause of the damage determine what is realistic. Surface wear, damaged sections, failed coatings, deeper structural problems, and moisture should not all be treated as the same issue. Armor of God Epoxy evaluates the existing slab first and can provide resurfacing and restoration when the condition suits that approach.

5. How should facilities plan around flooring installation downtime?

Start by identifying which sections can be cleared and how long those areas can stay out of service.

The preparation required, selected coating system, size of the floor, repairs, site conditions, and cure requirements can all affect the schedule.

Discussing access before installation also helps determine if sections can be handled in stages or if a larger shutdown makes more sense.

areas we serve

Built in Menomonie. Trusted Across Western Wisconsin.

Menomonie is home base, but the same crew, the same moisture testing, and the same standard travel with the trailer to every county on this list.

Dunn County

Eau Claire County

St. Croix County

Chippewa County

Pierce County

Pepin County

Let the Building Define the Floor

A facility manager should not have to describe an industrial floor as simply good or bad. Walk the team through where the slab is worn, where moisture keeps showing up, and what actually crosses that floor every day. Those details give the team something useful to design around. From there, the coating becomes part of solving the building’s flooring needs instead of another layer placed over them.